top of page
Metrology Off-Site Calibration Services

METROLOGY CENTER OFF-SITE CALIBRATION SERVICES

OUR METROLOGY LAB OFFERS IN-HOUSE CAPABILITIES + SUPPORT FOR MANAGING SPECIALIZED VENDOR METROLOGY SERVICES VIA OUR CONTROLLED LOGISTICS TAG TRACING SYSTEM

ELECTRONIC CALIBRATION

Supporting a broad range of Digital Meter Calibrations Services for all Brands, Manufactures, Models with the highest accuracy lab standards available.

Electronic Multi-Meter Calibration
Pressure Calibration Service

PRESSURE CALIBRATION

Pressure calibrations within the Quantus Metrology Center are performed with a high accuracy full automated pressure controller. This method reduces calibration uncertainty for higher accuracy calibrations at the following ranges:

​

  • -15 to 300 PSI +/- 0.01 %FS

  • -15 to 15 PSI +/- 0.01 %FS

  • 0 to 10 inH2O +/- 0.008 %FS

OUR METROLOGY LAB IS CAPABLE OF SUPPORTING A LARGE VARIETY OF PRESSURE DEVICE-TYPE CALIBRATIONS, INCLUDING:

  • FLUKE Pressure Modules

  • Analog & Digital Pressure Gauges

  • Vacuum Gauges

  • Pressure Controllers

  • Pressure Data Loggers

  • Pressure Monitors & Recorders

  • Pressure Sensors & Switches

  • Pressure Transmitters & Transducers

AIRBORNE LASER PARTICLE COUNTER CALIBRATION

ISO 21501-4 airborne laser particle counter calibration service provides testing in the range of 0.3 and 0.5 microns up to 5.0 micron. This metrology service ensures you meet the requirements of controlled clean room environments operating in accordance ISO 14644.

Airborne Laser Particle Counter Calibration Services

OUR METROLOGY LABS' LASER PARTICLE COUNTER CALIBRATION RIG IS CONFIGURED TO SUPPORT A LARGE VARIETY OF MANUFACTURERS AND MODELS

  • Hach

  • BECKMAN MetOne

  • Climet

  • ​Particle Measuring Systems

  • TSI

  • Lighthouse

  • Kanomax

  • and More

Bio Air Sampler Calibration Service

BIOLOGICAL AIR SAMPLER CALIBRATION

Biological Air Sampler Calibration consists of time, flow rate, volume, and, depending on the make and model, some air samplers will be tested for relevant and non-relevant flow rates.

 

Our metrology calibration lab can support many different air sampler manufacturers and own several OEM Air Velocity Standards, including but not limited to the following Manufacturers and Models:

  • PBI SAS 90, 100, 180

  • PBI SAS DUAL HEAD

  • EMD Millipore

  • MAS 100

  • BioMerieux Air Ideal

  • BioTest RCS

  • Mattson Garvin STA

  • Veltek VAI SMA

TEMPERATURE DATALOGGER CALIBRATION

Using high-accuracy PRTs with controlled temperature baths for external sensors, and temperature test chambers with RTD multiplexers, our metrology lab is capable of testing temperature data loggers with the following ranges and accuracies.

​

  • External Sensor Range: -90°C to 400°C +/- 0.05°C

  • Internal Sensor Range: -40°C to 80°C +/- 0.2°C

Temperature Datalogger Calibration Service

  • MADGETECH

  • VAISALA

  • CRYOPACK

  • SENSITECH TEMPTALE

  • DICKSON

  • SUPCO MICRODAQ

  • T&D

  • OMEGA

  • ...and MORE

Temperature & Humidity Datalogeer Calibration Equipment

TEMPERATURE & HUMIDITY DATALOGGER CALIBRATION

Our metrology center uses High Accuracy Temperature and Humidity sensors and (5) Controlled Test Chambers, + (2) Standby Chambers (for business continuity & rush turnaround). With this capacity, our metrology services are capable of processing 100s of logger calibrations while maintaining very precise uniformity across the batch.

​

  • Humidity Testing Range: 10 %RH to 90 %RH

  • Humidity Accuracy +/- 1 %RH to 1.7%RH

TEMPERATURE CALIBRATION

Our metrology lab has a very wide range of temperature calibration capabilities across a variety of sensors, meters, test points, and tolerances. Supporting ALL Brands and a large variety of device types.

  • IR Thermometer (30°C to 650°C)

  • Thermocouples & Thermometers

  • PRT, RTD, Surface Probe, and Digital Meters

  • -90ºC to 400ºC

  • Accuracy of Standards as low as 0.025ºC

Temperature Calibration Service
Tachometer Calibration Service

TACHOMETER CALIBRATION

Using a state-of-the-art frequency generator, our metrology services can calibrate any manufacturer of optical tachometer with very high accuracies.

  • 5 RPM to 99,999 RPM (Optical Sensors)

  • Supporting a large variety of Manufacturers & Models

  • Channel partner supported contact tachometer for high-speed contact only

STOPWATCH & TIMER CALIBRATION

Time-based stopwatch and timer calibrations are performed with a standard that utilizes oscillating crystal technology and an acoustic pickup microphone.

 

This NIST Traceable standard picks up on the internal frequency of the UUT timing devices, and can accurately detect timers errors down to 0.03 sec/day.

 

Our metrology lab offers calibration support for any digital timing device.

Stoopwatch & Timer Calibration Service
bottom of page